Skip to content
Aerial view of a large modern home with a gray standing seam metal roof, pool and spa

New Metal Roof Installation in Stuart, FL

Metal Roofing Services We Perform

  • Standing Seam Installation

    Raised, interlocking panels with every fastener hidden underneath. It's the cleanest profile we install, and the one most people picture when they hear "metal roof."

  • 5V Crimp Panels

    An exposed-fastener panel with a crimped rib down every seam. A classic Florida look, and usually the most affordable of the four profiles.

  • 1" Nailstrip Panels

    A concealed-fastener panel with a slimmer seam than mechanical seam, for a tighter, more contemporary line.

  • 1.5" Mechanical Seam

    Crimped on site rather than pre-formed. Our most weather-tight profile, and usually the first call on a low-pitch or storm-exposed roof.

  • Insurance Roof-Age Documentation

    Citizens gives metal more roof-age room than shingle before it asks for full-replacement paperwork. We'll help you document a new metal roof for your carrier when that matters.

  • Final Walkthrough & Warranty

    Every metal re-roof gets a walkthrough with you before we call it finished, backed by our 10-year workmanship warranty plus whatever manufacturer coverage applies to your panels.

Why Metal?

A metal roof holds up because it has fewer places to fail. Continuous panel runs with sealed seams beat individual shingles or tiles that can lift, crack, or slip in a bad windstorm, and the reflective surface knocks down how much heat makes it into the attic, which matters when the AC runs most of the year here.

The tradeoff is cost. Metal runs mid to higher than shingle depending on the profile, and even its cheapest form, 5V crimp, costs more upfront than a shingle re-roof. For an owner staying in a home twenty-plus years, or sitting right on the coast, that number tends to pay for itself in fewer repairs and a better insurance bucket down the line.

What You're Actually Buying

  • Decades, Not Years

    Outlasts shingle by decades when it's installed right, with less upkeep along the way.

  • Cooler Attic, Lower AC Bills

    A reflective surface knocks down attic heat gain, especially in lighter finishes.

  • 29 Colors to Choose From

    26 standard colors and 3 premium finishes, so the roof still looks like your house.

  • The Better Insurance Bucket

    Citizens gives metal more roof-age room than shingle before it asks for replacement paperwork. Full breakdown: Florida's roof age insurance rules.

Worried About an Insurance Non-Renewal?

Florida law (Statute 627.7011) won't let an insurer drop you for age alone before your roof turns 15. Metal gets extra room after that too: Citizens allows it more roof age than shingle before it asks for full-replacement paperwork.

Call Us: (772) 800-6100

How a Metal Re-Roof Comes Together

  1. Walkthrough & Profile Pick

    We look at your roof's pitch and your budget, then help you pick which of the four profiles actually fits, standing seam, 5V crimp, nailstrip, or mechanical seam, before writing up a free estimate.

  2. Permit, Panels & Prep

    Once you approve it, we pull the permit and order panels in your chosen profile and color. A quick onsite check catches anything a photo-only estimate could not.

  3. Fastening, Flashing & Final Walkthrough

    Underlayment goes down first, then panels are set with the fastening or seaming method specific to your profile, careful flashing at every transition, and a walkthrough with you once it's done.

Roof Visualizer

Pick a Color, See It On Your Roof

Upload a photo of your home and preview any of our metal panel colors on it. We still bring real samples to every estimate.

Try It On Your Home

27 colors. Tap one to preview it on a photo of your house.

Still Deciding Between Metal and Something Else?

Metal isn't one product. It's four different panel profiles, each with its own fastening method, and picking the wrong one for your roof's pitch is an easy way to overpay or underperform.

If you're weighing metal against shingle or tile, we'll walk you through where each one actually wins on your roof, plainly, before you commit to anything.

Aerial view of a home with a gray metal roof and screened pool cage

Frequently Asked Questions

What's the difference between standing seam and 5V crimp?

Standing seam hides its fasteners under raised, interlocking seams; 5V crimp has exposed fasteners and a distinctive crimped rib. Standing seam typically costs more and gives a cleaner look; 5V crimp is the more budget-friendly classic.

Is metal roofing worth the extra cost over shingles in Florida?

For owners planning to stay long-term, many find the lower maintenance, strong wind performance, and better Citizens insurance treatment worth the higher upfront cost. It comes down to your time horizon and budget.

How long does a metal roof installation take?

It depends on roof size and profile, since mechanical seam panels are crimped on site rather than pre-formed. We'll give you a realistic timeline during your estimate.

Does a metal roof make noise in the rain?

With proper underlayment and solid decking, which is standard on our installs, a metal roof isn't noticeably louder than other systems during rain.

Can I install metal roofing over my existing shingle roof?

No. Florida re-roofs generally require tear-off to the deck so the underlayment and fastening can be installed and inspected correctly, which is also what gives you the wind rating you’re paying for.

Which metal roof profile is best for a low-pitch roof?

Mechanical seam is typically the strongest choice for lower-pitch or more weather-exposed sections because of how tightly the seams lock, but we'll confirm the right fit for your specific roof.

Does metal roofing help with insurance costs?

It can, particularly because Citizens groups metal with tile under a longer replacement-documentation window than shingle roofs get. Confirm specifics with your agent, since every policy is a little different.